ASM1062 SERIAL ATA CONTROLLER DRIVER DRIVERS
ASM1062 SERIAL ATA CONTROLLER DRIVER DRIVER
ASM1062 SERIAL ATA CONTROLLER DRIVER UPGRADE

My lspci -v looks like this:Р В РІР‚СњР вЂ™Р’В 000:0a:00.0 SATA controller Mass storage controller: ASMedia Technology Inc. I was really hoping for some plug and play love from VMware.

ASM1062 SERIAL ATA CONTROLLER DRIVER UPGRADE

I'm having the same issue - but I opted to upgrade to a cheap SATA PCIe card to add a couple of small 60GB SSDs to my existing config.

ASM1062 SERIAL ATA CONTROLLER DRIVER DRIVERS

Your 2 intel sata ports should work fine but for ASMedia ports you will need to track down the drivers 4 x SATA3 6.0 Gb/s connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug functions (SATA3_A4 connector is shared with eSATA3 port) 2 x SATA3 6.0 Gb/s connectors by IntelР В РІР‚в„ўР вЂ™Р’В® Z68, support RAID (RAID 0, RAID 1, RAID 10, RAID 5, IntelР В РІР‚в„ўР вЂ™Р’В® Rapid Storage and IntelР В РІР‚в„ўР вЂ™Р’В® Smart Response Technology), NCQ, AHCI and Hot Plug functions Just pulled specs of your board and it looks like you have same issue. So it does look like vmware removed bunch of controllers from the build. I had to rewire my second ssd to intel port which is labled sata0 and sata1 and both are seen by esxi 5.5. it was working fine on esxi 5.1u1 when i booted of usb 5.5 installer it would only see intel port. I had one ssd connected to intel port and one to asmedia port. I have an ASrock Z77 Extreme 4 and my board has 4 sata 3 connectors.Р В РІР‚СњР РЋРЎвЂє x SATA3 6.0 Gb/s connectors by Intel Z77Р В РІР‚СњР РЋРЎвЂє x SATA3 6.0 Gb/s connectors by ASMedia ASM1061 SATA3_A1 port and SATA3A0)

ASM1062 SERIAL ATA CONTROLLER DRIVER DRIVER

vmkdevmgr: Found driver vmw_ahci for device bus=pci addr=p0000:07:00.0 id=1b21061218490612010601.Ran into same issue on my upgrade. vmkdevmgr: Error loading driver vmw_ahci: Unable to load module /usr/lib/vmware/vmkmod/vmw_ahci: Failure In the vmkdevmgr-logs, I've found these entries: Module vmw_ahci loaded esxcli system module list |grep ahciР В РІР‚СњР В РІР‚С› reboot results in the same situation, no driver loaded, and therefor storage device not detected and disks not visible. I noticed the vmw_ahci driver is not loaded during boot, even after re-enabling this with the esxcli system module. When logging into via GUI (webinterface), I see the numbers next to 'Virtual Machines' and 'Networking' are correct, however the number next to 'Storage' is 0. ASM1062 Serial ATA Controller esxicli storage filesystem list The Intel sata controller has 2 SSD's connected, containing the ESXI files/system and VM's, where the ASmedia controller has 2 HDD's connected as phyiscal disk to my NAS-VM (by virtualized LUN or something like that -> not a vmware specialist).Р В РІР‚СњР В РІР‚С›s explained in troubleshooting an issue with one of the HDD's, I decided to disable the vmw_ahci driver which resulted the current esxcli storage core path esxcli storage core device lspci -vvv |grep vmhbaР В РІР‚СњР вЂ™Р’В 000:07:00.0 Mass storage controller SATA controller: ASMedia Technology Inc. FYI: this server was running fine for 2 years with the following storage config (using the vmw_ahci lspci -vvv |grep hbaР В РІР‚СњР вЂ™Р’В 000:00:12.0 Mass storage controller SATA controller: Intel Corporation Device 31e3 Р В РІР‚СњР вЂ™Р’В 000:07:00.0 Mass storage controller SATA controller: ASMedia Technology Inc. Anyhow after disabling the vmw_ahci driver, my esxi-server does not recognize the storage devices anymore, and therefor does not see/mount any of the disks anymore. A potential solution for my issue was disabling the vmw_ahci driver, resulting in the sata_ahci driver being used after a reboot. I've succeeded to 'bring down' my ESXI server when troubleshooting issues with 1 SATA HD.

Asm1062 serial ata controller driver